System module loader - LDR V1.5 Build:0008 Assert
Mod scan 10010100 to 10230100
MEM - 10024000 (flash 00404000)
PARMS - 10024400 (flash 00404400)
LDR - 10024800 (flash 00404800)
LINUX - 10044000 (flash 00424000)
num modules: 4
checking LDR V1 at 10024800, alive=0, load=10002000
checking LINUX V1 at 10044000, alive=0, load=11800000
checking MEM V1 at 10024000, alive=0, load=11F00000
checking PARMS V1 at 10024400, alive=0, load=11900000
4 Modules processed, 4 are valid
LDR thinks global number for them is 1
Found mod <LINUX> V=1 at 10044000
Found mod <PARMS> V=1 at 10024400
Linux command line module (PARMS) found at 10024400
INITRD Not found
Linux start-up params (Any key to edit)
Found mod <LINUX> V=1 at 10044000
Uncompressing Linux........................................................ done, booting the kernel.

Linux version 2.4.18_mvl30-ams-delta (droberts@dev1-linux) (gcc version 3.2.1 20020930 (MontaVista)) #1 Mon Aug 23 07:34:07 BST 2004

CPU: ARM/TI925 Arm925Tsid(wb) revision 2

Machine: AMS-DELTA/OMAP1510

modem enable 0


On node 0 totalpages: 7424

zone(0): 7424 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,115200n8 init=/start_cramfs rootfstype=cramfs root=/dev/dfdb4 ro ams_mmod_base=0x10FFF000 ams_mmod_size=0xFFF mem=29M ams_mod_ver=1

unmask_irq(#e)

rtsched version <20011203.1609.50>

Console: colour dummy device 80x30

Calibrating delay loop... 74.75 BogoMIPS

Memory: 29MB = 29MB total

Memory: 27272KB available (1386K code, 493K data, 64K init)

Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

Disabling the Out Of Memory Killer

Installing stub AMS_DELTA keyboard driver.

pty: 256 Unix98 ptys configured

SERIAL DRVR

Serial driver version 5.05c (2001-07-08) with no serial options enabled

ttyS00 at 0xfffb0000 (irq = 46) is a OMAP UART

ttyS01 at 0xeb000000 (irq = 66) is a Smart SMC

omap-rtc: RTC power up reset detected.

omap-rtc: Enabling RTC.

Real Time Clock Driver v1.0

block: 64 slots per queue, batch=16

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

DSPLinux FB (c) 2001 RidgeRun, Inc.

Looking for mono/colour, GPIO=FB93, proc_conf_bit=800

LCD is colour, 16BPP

tifb_init v_screen_base:C1C81000

tifb_init_palette_color : set palette[0] at C1C80FE0 to be 4000

tifb_init_registers

lcd_write_top_address

fffedb04 11c8

wrote fffedb04 11c8

fffedb02 %

wrote fffedb02 0fe0

lcd_write_bottom_address

fffedb08 11cc

wrote fffedb08 11cc

fffedb06 cefe

wrote fffedb06 cefe

fffedb00

wrote fffedb00 00000004

tifb_init_dma size=311072

tifb_init_dma base=11c80fe0

tifb_init_dma end=11cccefe

print_lcd_regs

control: fe800e64 status ffffff92 timing0 000009df timing1 00000143 timing2 fc002504

lcd_enable Entered

lcd_enable Exit

tifb_init_registers Exit

tifb_init now call to tifb_map_video_memory

tifb_init setup LCD IRQ handlers (31 and 25)

tifb_set_var display->bpp = 16

tifb_setcolreg : set palette[0] to be 4000

tifb_init call to register_framebuffer()

Registering FB MAJOR 29 Minor 0

MKS - visual_init 0

do_install_cmap

tifb_setcolreg : set palette[0] to be 4000

tifb_setcolreg : set palette[0] to be 4000

do_install_cmap

tifb_setcolreg : set palette[0] to be 4000

Looking for mono/colour, GPIO=FB93, proc_conf_bit=800

Looking for mono/colour, GPIO=FB93, proc_conf_bit=800

tifb_setcolreg : set palette[0] to be 4000

Console: switching to colour frame buffer device 60x40

tifb_init SUCCESSFUL exit!

usb-ohci.c: USB OHCI at membase 0xfffba000, IRQ 38

hub.c: USB hub found

hub.c: 3 ports detected

pegasus.c: v0.4.22 (2001/12/07):Pegasus/Pegasus II USB Ethernet driver

usbserial.c: USB Serial Driver core v1.4

belkin_sa.c: USB Belkin Serial converter driver v1.1

MFS-DFD: flash base = 00400000, size=01c00000

MFS-DFD: device_size=02000000 block_size=16384

MFS-DFD: remap table initialised to 1:1 mapping

MFS-DFD: reading media descriptor 1

MFS-DFD: Found valid media descriptor

MFS-DFD: Finished building remap after 0 entries

boot_partn=1 but this is IGNORED!

MEM1 Module found a@404000

FSYS1 Module V1 found @624000

Looking for LNXFSYS in pos 2 at 008A4000

FSYS2 Module V2 found @8a4000

FSYS - res == OK

FSYS - both FSYS1 and FSYS2

FSYS - FSYS1 version < FSYS2 version so boot = 2

FSYS - active version = 2

Swapping partitions - boot partn % 2 = 0

Numpartitions =6

0        DFD	00000000  to 01ffffff

1        FFS	00000000  to 003fffff

2   MFS CODE	00400000  to 013fffff

3    MFS AGF	01400000  to 01ffffff

4    FILESY2	008a4100  to 00b1ffff

5    FILESY1	00624100  to 008a3fff

dfdblk: init complete, 6 devs, blks 1024 size  32768  4096  16384  12288  2543  2559 

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

IP-Config: No network devices available.

VFS: Mounted root (cramfs filesystem) readonly.

Freeing init memory: 64K

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/net/unix/unix.o
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/fs/ramfs/ramfs.o
extracting links.tar.gz
removing mnt
removing proc
removing var
removing dev
removing etc
removing delta/aec_config.txt
Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/char/ams_keyb_mod.o
request_irq(#41) - calling request_fiq()

request_fiq(#41), handler c201a7f0, irq_flags 0, devname keyboard, dev_id 00000000

install_fiq_handler(): claimed FIQ OK . retval = 0

install_fiq_handler(): Handler in RAM

install_fiq_handler(): set_fiq_handler()

set_fiq_handler() FIQ_VECTOR = FFFF001C

enable_irq(#41)

gpumsk(#41),cmsk #FFFF, inp #FB93, cnt #4, sta #0 5970

request_fiq(#41) - END

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/char/ams_beep_mod.o
Done AMS_DELTA simple beep install - old_func=C00B8310

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/media/video/videodev.o
Video for Linux One (2.2.16). Major device: 81

Video for Linux Two (V0.20). Major device: 81

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/media/video/omap/v4l2-omap.o
camif: Initializing, DMA to SDRAM

camif: camera module detected, facing backward

sccb: registered SCCB

camif: OV6X30 / OV6X50 camera detected

V4L2: Registered "OMAP1510 V4L2 Capture Driver" as char device 81, 0

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/usb/printer.o
printer.c: v0.8:USB Printer Device Class driver

Using dfd.o
insmod: init_module: dfd: Device or resource busy
MPU


 MPU_L1_ITR 0

 MPU_L1_MIR 3defbffc

 MPU_L1_SIR_IRQ_CODE 0

 MPU_L1_SIR_FIQ_CODE 0

 MPU_L1_CONTROL_REG 0

 MPU_L1_ILR14 7d

 MPU_L1_ISR 0

GPIO


 GPIO_DATA_INPUT fb90

 GPIO_DATA_OUTPUT 0

 GPIO_DIRECTION_CONTROL fcff

 GPIO_INTERRUPT_CONTROL 4

 GPIO_INTERRUPT_MASK fffd

 GPIO_INTERRUPT_STATUS 0

 GPIO_PIN_CONTROL ffff

Using ams-delta-sys.o
Ams_delta_sys driver version 1.0

10fff000: Allocated

10fff800: Allocated

Using smartcard.o
smartcard:smartcard_init: Entered


Smartcard driver version 1.0

smartcard:smartcard_init: smartcard major no=250


Using hdwdock.o
Dock-it driver version 1.0

Using dsplinkk.o
Using shmemModule.o
Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/drivers/char/omap_wdt.o
omap_wdt: TI OMAP Watchdog Timer: timer margin 19 sec

Using /lib/modules/2.4.18_mvl30-ams-delta/kernel/net/unix/unix.o
insmod: A module named unix already exists



== WATCHMAN STARTING =====
Watchdog default timeout = -1073742332

Watchdog timeout set to = -1073742332

Watchdog Ticking Away!


create_server_socket() - Creating AF_UNIX socket

	CHILD: Forked - child
&watchman_ws 0x8080a8, watchman_ws 0x123456
	CHILD: msg.type = 1
	CHILD: msg.pid = 95
	CHILD: msg.psys_watchman_ws = 0x8080a8
Sending message



WATCHMAN: rxd PROCESS_PROFILE_TYPE msg

	psys_watchman_ws0x8080a8
Recombined IMPORT_LIBC      ver 1

Recombined M_LNG            ver 1

Recombined sasken1          ver 1


Global Build Number = 1

Process id is 95

Skipped 448
Skipped 448
Skipped 448
Skipped 452
Skipped 452
Skipped 452
Skipped 463
Skipped 463
Skipped 463
Skipped 502
Skipped 502
Skipped 502
Skipped 2124
Skipped 2124
Skipped 2124
Hello World

printf ordinal now being mapped to dummy function. 008115BC being set to 00BF44F8
puts ordinal now being mapped to dummy funcfb_open Open fbidx=0 info=c01df6c4

tion. 008117B4 being set to 00BF44F8
Bye then..
printf now rtifb_encode_fix() just set the fix->len field to 4BF00

emoved
modem enable 3086


request_irq(#42) - calling request_fiq()

request_fiq(#42), handler c00c2698, irq_flags 4000000, devname serial, dev_id c01cedc0

enable_irq(#42)

gpumsk(#42),cmsk #FFFD, inp #FB90, cnt #4, sta #0 30860

request_fiq(#42) - END

smartcard:smartcard_open: Entered


KBC set to FFFD

tifb_encode_fix() just set the fix->len field to 4BF00

KBC set to FFFD

KBR value is FFFF and GPIO=FB90

KBC set to FF00

driver set LCD contrast 112

PWT volume set to 20

DFD: dfd_fsys_ver_num=2 returned in ioctl call

WRITE_REG CALLED reg fffece00 size 4 value 250e


WRITE_REG CALLED reg fffece10 size 4 value 6


WRITE_REG CALLED reg fffece08 size 4 value 6ff


WRITE_REG CALLED reg e1008014 size 4 value 10001


WRITE_REG CALLED reg e1008000 size 4 value 1990199


WRITE_REG CALLED reg e1008008 size 4 value 3f003f


WRITE_REG CALLED reg fffe1080 size 4 value 10000222


driver set LCD contrast 144

free_irq(#42) - calling free_fiq()

disable_irq(#42)

gpio_mask_irq(#42)

free_fiq(#42)

modem disable 3515


modem enable 3525


request_irq(#42) - calling request_fiq()

request_fiq(#42), handler c00c2698, irq_flags 4000000, devname serial, dev_id c01cedc0

enable_irq(#42)

gpumsk(#42),cmsk #FFFD, inp #FB90, cnt #4, sta #0 35250

request_fiq(#42) - END